Facet’s standard carbon steel MS Series SuperFlex  filter housings are small, economical housings for in-line removal of solids from aviation fuels when equipped with Facet’s FA, M or CIF Series High Efficiency filter cartridges.

Facet filter housings are specifically designed to remove solid particles such as rust, dirt, pipe scale, sand  and metal from fuel. They are commonly located ahead of clay treaters and coalescer separators to protect and prolong cartridge life. A single pass through the filter allows clean product to flow downstream.

Facet’s Fuel-Gard® Aviation Spin-On Filters perform three jobs to give you clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids even when surfactants and fuel additives are present, and shut down system flow when hit with a localized slug of water. The filters are designed to flow at a rate of 13 gpm (FGS-O-405) and 15 gpm (FGS-O-409). 

The primary purpose of clay treatment is to protect aviation fuel filtration systems and jet fuel by removing trace quantities of surfactants (surface active agents), color and additives commonly found in fuel.

The Facet 6″ (152 mm) nominal outside diameter FG Series Fuel-Gard® monitor cartridges perform three jobs to give you clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids, and
shut down system flow when hit with a localized slug of water. They are designed to flow from inside to outside at a rate of 4 gallons (15.14 liters) per inch of length.

The Facet 2″ (51 mm.) nominal outside diameter FG Series Fuel-Gard® monitor cartridges perform three jobs—they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit
with a localized slug of water, giving you clean, dry fuel. The FG Series Fuel-Gard® monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Facet’s ST-5 Series Teflon® separators use Teflon coated screen wrapped around an epoxy coated metal shell, lock-seam folded, then adhesive bonded to metal end caps with gaskets.

Facet SS-5 Series Synthetic and ST-5 Series Teflon separator cartridges are cleanable and reusable. They come in a variety of dimensional and end cap configurations.

Facet’s standard carbon steel VCS Series SuperFlex Coalescer Separators are small, economical housings for in-line removal of water and solids from aviation fuels where water content is a problem. Using Facet high quality coalescer and separator cartridges, they provide the best water and solids removal.