FMA-6000-3D

FMA 6000

FMA 6000

BY CATEGORY:

FMA 6000 Self-Cleaning Screen Filters

STF filters Series 6000 are electric drive automatic screen filters. They are specially designed for their assembly in piping alignments with high flow rates for municipal, industrial and irrigation applications.

Features:

  • Continuous filtration process during the backwashing cycle.
  • Double Diamond screen that diminishes the head loss and make the backwashing
  • 1, 1,5 and 2 mm filtration degrees.
  • It is designed for tubes between 500 mm and 3 meters diameter. (16 – 120″)
  • Flow rates up to 52.000 m³/h.
FMA-2000-3D

FMA 2000

FMA 2000

BY CATEGORY:

FMA 2000 Self-Cleaning Screen Filters

STF filters Series 2000 are electric drive automatic screen filters. They are specially designed for demanding filtrations with low flow rates for municipal and irrigation applications.

Features:

  • Continuous filtration process during the backwashing cycle.
  • Minimum backwashing water consumption.
  • We offer the possibility to put together several filters and use one programmer for all of them.
  • Two versions: PVC and stainless steel filtering cartridge.
  • Filtration degrees from 100 up to 1000 microns.
  • State- of- the- Art screens that guarantee 100% the filtration degree.
  • Flow rates between 5 and 1.250 m³/h.
HP-Series-Single-Stage-Coalescer-Housings

Single-Stage Coalescer – Model HP

Single-Stage Coalescer – Model HP

BY CATEGORY:

Single-Stage Coalescer – Model HP Filter Housing

Facet HP Series single-stage coalescers use wafer repacks to remove gross amounts of water and solids from hydrocarbons. They are available in several standard sizes to accommodate flows from 10 to 2000 gpm (38 to 7570 lpm). They provide protection to filtration systems from gross amounts of water and solids that are commonly carried through inbound transport pipelines.

Features & Benefits:

  • Designed to remove gross amounts of water and solids from hydrocarbons
  • No internal moving parts, reducing maintenance costs
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or “CE” marked
Clay treater housing Model F

Clay Treater Housing – Model F

Clay Treater Housing – Model F

BY CATEGORY:

Clay Treater Housing - Model F

Clay treaters are usually placed upstream of a
coalescer separator system to remove surface
active agents (surfactants), color and additives from jet fuel. These unwanted contaminants may be present in fuel at the processing and refining levels or picked up from various transportation methods such as trucks, ships and pipelines that carry several types of petroleum products in addition to jet fuel.
The contaminant compounds will accumulate
and disarm the coalescer cartridge and reduce
the water coalescing efficiency of the coalescer separator. Clay treatment removes the surfactant compounds, color and additives by adsorption and delivers treated fuel to the coalescer separator while prolonging the life of the coalescer cartridges.

Features & Benefits:

  • Removes surface active agents (surfactants), color and additives from jet fuel
  • No internal moving parts
    Removable cartridge mounting post
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or “CE” marked
superflex-model-vfgm-monitor-housings

SuperFlex™ – Model VFGM

SuperFlex™ – Model VFGM

BY CATEGORY:

SuperFlex™ – Model VFGM Filter Housings

Facet’s VFGM Series SuperFlex  monitor housings are built to ASME Code, constructed of carbon steel. Stainless steel construction is available. Contact your Facet Representative for details. They are furnished with FG-O Series 6” monitor cartridges that meet the latest edition of EI specification 1583 Aviation Fuel Filter Monitors with Absorbent Type Elements.

Features & Benefits:

  • Absorbs free and emulsified water, removes ultra-fine solids and shutdowns the systems flow when hit with a localized slug of water
  • Welded carbon steel construction
  • Designed for 250 psi (17.5 kg/cm²) @ 250ºF (121ºC)
Superflex vf 21

Fuel-Gard® Monitor Housings – Model VF-21SB / 22SB

Fuel-Gard® Monitor Housings – Model VF-21SB / 22SB Filter Housings

BY CATEGORY:

Fuel-Gard® Monitor Housings – Model VF-21SB / 22SBFilter Housings

Facet VF-21SB/22SB Series filter cartridges provide long service life and high solids holding capacity with no unloading characteristics. The filter cartridges remove solids from aviation fuels.

Features & Benefits:

  • Absorbs free and emulsified water, removes ultra-fine solids and shutdowns the systems flow when hit with a localized slug of water
  • NEW DESIGN. Quick open swing bolt type closer
  • New optional mounting brackets for installation
superflex-model-fs-clay-treater-housings

SuperFlex™ Clay Treater – Model FS

Superflex™ Clay Treater Housings

BY CATEGORY:

Superflex™ Clay Treater Housings

Facet’s standard carbon steel FS Series SuperFlex housings are small economical housings that can be used as clay treaters, but at lower flow rates than our standard F Series housings.

Features & Benefits:

  • Can be used as clay treaters, but at lower flow rates than our standard Model F housings
  • Flow rates from 7 to 14 gpm (26 to 52 lpm)
  • Welded carbon steel construction (other materials available)
superflex-model-ms-microfilter-housings

SuperFlex™ – Model VCS (Category C or M)

SuperFlex™ – Model VCS (Category C or M)

BY CATEGORY:

SuperFlex™ – Model VCS (Category C or M) Filter Housings

Facet’s standard carbon steel MS Series SuperFlex  filter housings are small, economical housings for in-line removal of solids from aviation fuels when equipped with Facet’s FA, M or CIF Series High Efficiency filter cartridges .

Features & Benefits:

  • Small, economical, carbon steel housings
  • Removes water and solids from many types of fuel
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
Model VSC & HCS

Filter Water Separators – Models VCS & HCS (Category C)

Filter Water Separators – Models VCS & HCS (Category C)

BY CATEGORY:

Filter Water Separators – Models VCS & HCS (Category C) Filter Housings

Category C Coalescer Separator housings are for commercial aviation fuel. Type S qualifications can be used at all filtration points in an aviation fueling system. Type S is meant to be used at filtration points  where significant levels of water and dirt in the product can be expected. Facet VCS Series Vertical Coalescer Separator housings & Facet HCS Series Horizontal Coalescer Separator housings fully comply with EI 1581, Category C, Type S requirements.

Features & Benefits:

  • Vertical & horizontal configurations available
  • Designed to filter solids and separate water from fuels
  • Easy service and reduced maintenance costs
  • Qualified to 5th Edition of EI 1581,Category C, Type S
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or “CE” marked
fuel-gard-vf-21-coalescer-separator

Fuel-Gard® Housings – Model VF-21SB / 22SB

Fuel-Gard® Housings – Model VF-21SB / 22SB

BY CATEGORY:

Fuel-Gard® Housings – Model VF-21SB / 22SB Filter Housings

Facet VF-21SB/22SB Series coalescer separator cartridges provide long service life and high solids olding capacity with no unloading characteristics. These filter separator cartridges effectively remove water and solids from fuels.

Features & Benefits:

  • NEW DESIGN. Quick open swing bolt type closer
  • New optional mounting brackets for installation
  • Micron ratings of 2, 5, 10 & 25